ASRock 960GM-S3 FX XFast RAM Driver
XFast RAM will create a virtual disk from the system memory to boost the performance. For Photoshop, It can even perform 5X faster than before. GM-VGS3 FX M-ATX DDR3 SATA2 USB VGA AM3+. XFast Technology: XFast RAM / XFast LAN / XFast USB enters Standby mode (S1), Suspend to RAM (S3), hibernation mode (S4) or power off (S5). ASRock XFast RAM. GM-S3 FX MB, ASRock 3TB+ Unlocker utility ver, Asia · Europe · USA · China MB, ASRock XFast USB utility ver, Asia · Europe.
|Supported systems:||Windows XP, Windows Vista, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10, Windows 10 64 bit|
|Price:||Free* [*Free Registration Required]|
ASRock 960GM-S3 FX XFast RAM Driver
Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.
ASRock 960GM-S3 FX XFast RAM Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings. Before you install or remove any component, ensure that the power is switched off or the power cord is detached from the power supply. Unplug the power cord from the wall socket before touching any component.
ASROCK GM-VGS3 FX SocketAM3+ 2 DDR3 max memory 16GB Motherboards Components Multitronic
To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components.
- Drivers and utilites for ASRock motherboards - choice of model.
- Product Specifications
- Sorry this product is no longer available
Hold components by the edges and do not touch the ICs. Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that comes with the component. When placing screws into the screw holes to secure the motherboard to the chassis, please do not over-tighten the screws! Doing so may damage the motherboard.
Download ASRock XFast RAM Utility
Step 2. Step 3. Position the CPU directly above the socket such that the CPU corner with the golden triangle matches the socket corner with a small triangle.
Carefully insert the CPU into the socket until it fits in place. The CPU fits only in one correct orientation. Step 4.
The lever clicks on the side tab to indicate that it is locked. You also need to spray thermal grease between the CPU and the heatsink to improve heat dissipation.
Make sure that the CPU and the heatsink are securely fastened and in good contact with each other. For proper installation, please kindly refer to ASRock 960GM-S3 FX XFast RAM instruction manuals of the CPU fan and the heatsink. Otherwise, it will operate at single channel mode. If you install only one memory module or two non-identical memory modules, it is unable to activate the Dual Channel Memory Technology. Step 1.
Asrock 960Gm Gs3 Fx Owner S Manual FX_960GM S3 FX_UM.p65
Unlock a DIMM slot by pressing the retaining clips outward. PCI slots: PCIE slots: Installing an expansion card Step 1.
Before installing the expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation. Remove the bracket facing the slot that you intend to use.
Asrock 960GM-S3 FX драйверы
Keep the screws for later use. Align the card connector with the slot and press firmly until the card is completely seated on the slot.
Fasten the card to the chassis with screws. Please refer to the following steps to set up a surround display environment: Please refer to page 17 for proper expansion card installation procedures for details. VGA port 3.
Boot your system. Press to enter BIOS setup. Please make sure that the value you select is less than the total capability of the system memory.
If you have installed the drivers already, there is no need to install them again. Set up a multi-monitor display.
When you use multiple monitors with your card, one monitor will always be Primary, and all additional monitors will be designated as Secondary.